1 12

Radik Chemicals Aquaclean 7510 – Premium Anti-Scalant for Silica and Sulfate Control

Radik Chemicals Aquaclean 7510 – Premium Anti-Scalant for Silica and Sulfate Control

Rs. 1,609.00 + GST
Rs. 1,898.62 (Incl. GST)
Rs. 2,289.00 Rs. 1,609.00 + GST
Rs. 1,898.62 (Incl. GST)
Rs. 321.80/kg
Sale Sold out
Shipping calculated at checkout.
Packaging

Radik Chemicals Aquaclean 7510 is a high-pH anti-scalant and anti-foulant designed for reverse osmosis (RO) and nano-filtration (NF) systems. Its proprietary organo-phosphate formulation provides broad-spectrum scaling protection, making it especially effective for potable water production and challenging feed water conditions.

 

🫗 Quick Highlights

  • High-pH anti-scalant for RO & NF systems
  • Prevents silica, sulfate & carbonate scaling
  • Eliminates acid dosing in most cases
  • Improves RO recovery & efficiency
  • Reduces feed water demand & reject water volume
  • Safe, non-hazardous, potable water compatible
  • Very High pH
  • Works as Anti-scalant and Anti-foulant
  • Broad Spectrum Scale Inhibition
View full details

💧 Key Benefits

Controls scaling up to +2.6 LSI

Prevents scaling from silica, sulfates, carbonates (Ca, Mg, Ba, Sr), and phosphates

Tolerant to iron, magnesium & aluminum hydroxide precipitation

Works over a wide pH range, eliminating the need for acid dosing in most cases

Operates as both anti-scalant and anti-foulant

Enables optimum recovery rates, reducing feed water usage and reject water volume

Provides significant cost savings in consumables and operations

Safe, non-hazardous formulation suitable for potable water

📌 Technical Properties

Appearance: Pale yellow liquid

pH (as packed): 10 – 11

Freezing Point: < –5 °C

Solubility: Fully miscible with water in all proportions

Specific Gravity: 1.30 – 1.45

🚰 Usage & Dosing

Dose continuously before the cartridge filter

Typical dosage: 2–5 mg/l

Can be diluted; fully miscible with water

Prepare fresh solutions daily for best performance

🛡️ Safety & Handling

Aquaclean 7510 is anon-hazardous blend of phosphonates and carboxylic acids. It is compatible with carbon steel and other commonly used RO materials. Material Safety Data Sheet (MSDS) available on request.

❓ How To Use

  1. Install a Dosing Pump: RO antiscalant should be dosed using a metering/dosing pump installed before the RO high-pressure pump, usually in the feed water line.
  2. Prepare the Antiscalant Solution: Dilute the antiscalant with RO permeate water or clean soft water in a dosing tank if required. Typical dilution ratios range from 1:10 to 1:20, depending on system design.
  3. Set the Correct Dosage: The normal dosage is 2–5 ppm, but the exact dose depends on feed water quality (TDS, hardness, silica, etc.). A water analysis or projection software may be used to determine the correct dosage.
  4. Continuous Dosing: The chemical must be dosed continuously whenever the RO plant is running to prevent scale formation on membranes.
  5. Monitor System Performance: Regularly check membrane pressure, flow rate, and recovery rate to ensure scaling is properly controlled.

⚙️ How It Works

RO antiscalants are specially formulated chemicals designed to prevent scale formation on reverse osmosis membranes.

  1. Scale Inhibition: Antiscalants interfere with the crystallization process of scaling salts such as calcium carbonate, calcium sulfate, barium sulfate, and silica, preventing them from forming solid deposits.
  2. Crystal Modification: They change the structure of scale crystals, making them too small and irregular to attach to membrane surfaces.
  3. Dispersion Effect: Antiscalants disperse suspended particles and micro-crystals in water so they remain suspended and pass through the system instead of sticking to the membrane.
  4. Membrane Protection: By preventing scale buildup, antiscalants help maintain higher membrane efficiency, stable permeate flow, and longer membrane life.

Difference Between Antiscalants

Features Aquaclean CVD Scale Rakshak Aquaclean 4036 V Aquaclean 4036 Aquaclean 5046 Aquaclean 6046 Aquaclean 6510 Aquaclean 7510
Appearance Clear–yellow Brown viscous Clear–yellow Clear–yellow Pale yellow Clear–yellow Clear–yellow Pale yellow
NSF Certification
Scale Control Basic Broad-spectrum Sulfates + carbonates Broad-spectrum, Sulfates + carbonates Silica + carbonates High-performance blend Strong threshold Premium multi-scale
Silica Handling Low Low Low Medium Medium-High High High Very High
Anti-Foulant Action Low Low Strong Strong Strong Strong Strong Strong
pH Range ≥ 9 9.78 2–5 2–5 4–6 4–6 ≥ 9 10–11
Specific Gravity 1.05–1.10 1.06 1.05–1.10 1.05–1.10 1.05–1.10 1.15–1.23 1.09–1.15 1.30–1.45
Ideal For Budget RO General RO Medium scaling Potable water Silica-prone RO Industrial RO High-hardness RO High-silica/high recovery
Price ₹89.80/kg ₹95.80/kg ₹115.80/kg ₹189.80/kg ₹213.80/kg ₹285.80/kg ₹303.80/kg ₹321.80/kg
On Call Assistance
On Call Assistance
100% Genuine Products
100% Genuine Products
Cash On Delivery Below Rs. 3,000
Cash On Delivery Below Rs. 3,000
ACPL Assured
ACPL Assured
Bulk Discounts Available
Bulk Discounts Available
Get GST Invoices
Get GST Invoices

FREQUENTLY ASKED QUESTIONS

Do you provide installation services?

Yes. We install RO plants, softeners, iron removal filters, ETP/STP systems, and all types of domestic & industrial water treatment plants across India.

Do you offer GST invoices?

Yes. Every order comes with a100% GST-compliant invoice, suitable for dealers, resellers, and industrial use.

How do I know which chemical or filter is suitable for my water?

You can share your raw water report, TDS, or problem description. Our technical team will recommend the correct chemical, membrane, filter media, or system.

Please connect with us from Contact Us.

Can I speak to someone before placing an order?

Yes, you can contact us directly via phone, email, or WhatsApp for product guidance or bulk pricing.

Bulk orders

Contact us for special pricing on bulk orders
Email WhatsApp Call